Lenovo ThinkServer RD210, Руководство по техническому обслуживанию аппаратной части

Страница: 25 / 182

2) Select Servers and Storage from the Product list.
3) From the Family list, select ThinkServer RD210 and click Continue .
4) Click on Hints and Tips .
d. Check for and replace defective hardware. If a hardware component is not operating within
specifications, it can cause unpredictable results. Most hardware failures are reported as error codes
in a system or operating-system log. Hardware errors are also indicated by light path diagnostics
LEDs. See the
Installation and User Guide for more information.
Troubleshooting procedures are also provided on the Lenovo Web site. A single problem might cause
multiple symptoms. Follow the diagnostic procedure for the most obvious symptom. If that procedure
does not diagnose the problem, use the procedure for another symptom, if possible. To locate
troubleshooting procedures for your server, complete the following steps.
Note: Changes are made periodically to the Lenovo Web site. The actual procedure might vary
slightly from what is described in this document.
1) Go to: http://www.lenovo.com/support.
2) Enter your product number (machine type and model number) or select Servers and Storage
from the Select your product list.
3) From Family list, select ThinkServer , and click Continue .
4) Click on Troubleshooting .
For more troubleshooting information, see the Installation and User Guide .
If the problem remains, contact Lenovo or an approved warranty service provider for assistance with
additional problem determination and possible hardware replacement. To open an online service
request, go to http://www.lenovo.com/support. Be prepared to provide information about any error
codes and collected data.
Undocumented problems
If you have completed the diagnostic procedure and the problem remains, the problem might not have been
previously identified by Lenovo. After you have verified that all code is at the latest level, all hardware and
software configurations are valid, and no light path diagnostics LEDs or log entries indicate a hardware
component failure, contact Lenovo or an approved warranty service provider for assistance. To open an
online service request, go to http://www.lenovo.com/support. Be prepared to provide information about any
error codes and collected data and the problem determination procedures that you have used.
Chapter 4
.
General Checkout
17