Lenovo ThinkServer RD210, Руководство по техническому обслуживанию аппаратной части

Страница: 118 / 182

5. Reach inside the server and push the assembly toward the front of the server.
6. From the front of the server, carefully pull the assembly out of the server while moving it slightly side
to side.
7. If you are instructed to return the operator information panel assembly, follow all packaging instructions,
and use any packaging materials for shipping that are supplied to you.
Installing the operator information panel assembly
To install the operator information panel, complete the following steps.
1. Read the safety information in Chapter 2 “Safety information” on page 3 and “Installation guidelines”
on page 67.
2. From the front of the server, slide the operator information panel
1
into the server until it clicks into place.
3. Inside the server, connect the cable to the rear of the operator information panel assembly.
The following illustration shows the cable routing for the operator information panel:
Note: The operation information panel cable should go in between the Video/USB cable (on the bottom)
and the CD/DVD cable (on the top) when all three cables are installed in the server.
110
ThinkServer RD210 Hardware Maintenance Manual