29
Measuring Preparation / Setting
Leica TPS800-4.0.0en
Setting up the tripod
1. Loosen the clamping screws on the tripod legs,
pull out to the required length and tighten the
clamps.
2. In order to guarantee a firm foothold sufficiently
press the tripod legs into the ground. When
pressing the legs into the ground note that the
force must be applied along the legs.
)
When setting up the tripod pay attention to a
horizontal position of the tripod plate.
Slight corrections of inclination can be made with the
foot screws of the tribrach. Larger corrections must
be done with the tripod legs.
)
When using a tribrach with an optical
plummet, the laser plummet cannot be used.
TPS800_Z19
TPS800_Z20
