124
Programs
Leica TPS800-4.0.0en
Use when you are setup on an unknown
station and only the coordinates of the
closing point are known.
1. Input the data for the point.
2. Measure to the closing point.
3. The results are displayed.
Use when you are setup on the closing
station and the coordinates for it are known.
1. Input the data for the closing station.
2. The results are displayed.
Use when you would like to leave the
traverse open. There is no last traverse
station.
1. The results are displayed.
)
If you started the traverse without a known
backsight point and you selected the option
or
, then, for calculating results, you have the
option to use the system azimuth saved in the instru-
ment from another program, for example if Free
Station was used before TraversePRO.
9. Results
1D Acc:
Accuracy in 1D
2D Acc:
Accuracy in 2D
L Err:
Length/distance error
A Err:
Azimuth closure error
[ADJUST]
To calculate an adjustment.
Unavailable when traverse is left
open.
[EXIT]
To end traverse without an adjust-
ment.
10. Adjustment
Angle misclosures are distributed equally.
Set the adjustment parameters.
Misc.-Distr.:
For misclosure distribution either
COMPASS or TRANSIT-rule can
be chosen.
Hgt.-Distr.:
The height error can be distributed
equally, by distance or not at all.
