64
Programs
Leica TPS800-4.0.0en
Reference Line/Arc
This program facilitates the easy stake out or
checking of lines/arcs for buildings, sections of road,
simple excavations, etc.
Reference Line
A reference line can be defined by referencing a
known base line. The reference line can be offset
either longitudinally, in parallel or vertically to the
base line, or be rotated around the first base point as
required.
Furthermore the reference height can be selected
as first point, second point or interpolated along the
reference line.
Procedure:
1. Definition of the Base line:
The base line is fixed by two base points that can be
defined in three ways:
•
Measured points
•
Enter coordinates using keypad
•
Select point from memory.
a) Measuring base points:
Input PtID and measure base points with [ALL]
or [DIST] / [REC].
b) Base points with coordinates:
[FIND]
Starts to search for the PtID
entered.
[ENH]
Manually input coordinates.
[LIST]
Displays the list of available points.
Analogue procedure for the second base point.
1) 1st base point
2) 2nd base point
TPS800_Z36
