User Manual LW120
Binary Block
Parameters
Binary block parameters are used for loading segment and sequence
tables into the generator's memory. Information on the binary block
parameters is given later in this manual.
SCPI Syntax and
Styles
Where possible the syntax and styles used in this section follow those
defined by the SCPI consortium. The commands on the following
pages are broken into three columns; the KEYWORD, the
PARAMETER FORM, and any NOTES.
The KEYWORD column provides the name of the command. The
actual command consists of one or more keywords since SCPI
commands are based on a hierarchical structure, also known as the
tree system. Square brackets ( [ ] ) are used to enclose a
keyword
that is optional when programming the command; that is, the LW120
will process the command to have the same effect whether the
optional node is omitted by the programmer or not. Letter case in
tables is used to differentiate between the accepted short form (upper
case) and the long form (upper and lower case).
The PARAMETER FORM column indicates the number and order of
parameter in a command and their legal value. Parameter types are
distinguished by enclosing the type in angle brackets ( < > ). If
parameter
form is enclosed by square brackets ( [ ] ) these are then
optional (care must be taken to ensure that optional parameters are
consistent with the intention of the associated keywords). The vertical
bar ( | ) can be read as "or" and is used to separate alternative
parameter options.
Remote Programming Reference 4-5