User Manual LW120
e 5-61. The FM Composer Opening Screen
The File command has 4 command lines that control waveform files.
Also use this com
Figur
File Commands
mand to exit the FM composer program. Description
of the various commands under File is given below.
New Waveform
scr
com
New
The
pre
waveform area. This command is also very useful for converting
waveform files to format that is acceptable by the Wave Composer.
The New Waveform command will remove the waveform from the
een. If you made changes to the waveform area and use this
mand, you should save your work before clearing the screen. The
Waveform command is destructive to the displayed waveform.
Open Waveform…
Open Waveform… command will let you brows your disk for
viously saved waveform files and load these waveforms to the
The Open Waveform command can convert ASCII. *ASF (space
delimited text). For additional information on files format, contact your
ArbExplorer 5-39