manualshive.com logo in svg

LeCroy 6000 SERIES, Руководство оператора, Страница: 38 / 409

Поделиться
Скачать
LeCroy 6000 SERIES Скачать руководство пользователя страница 38

Operator's Manual 

 

 

36

 

ISSUED: October 2003 

WR6K-OM-E Rev A

 

6. EXPORT RESTRICTIONS.

 You agree that you will not export or re-export the Software 

Product, any part thereof, or any process or service that is the direct product of the Software 
Product (the foregoing collectively referred to as the “Restricted Components”), to any country, 
person, entity or end user subject to U.S. export restrictions.  You specifically agree not to export 
or re-export any of the Restricted Components (a) to any country to which the U.S. has 
embargoed or restricted the export of goods or services, which currently include, but are not 
necessarily limited to Cuba, Iran, Iraq, Libya, North Korea, Sudan and Syria, or to any national of 
any such country, wherever located, who intends to transmit or transport the Restricted 
Components back to such country; (b) to any end user who you know or have reason to know will 
utilize the Restricted Components in the design, development or production of nuclear, chemical 
or biological weapons; or (c) to any end-user who has been prohibited from participating in U.S. 
export transactions by any federal agency of the U.S. government. You warrant and represent 
that neither the BXA nor any other U.S. federal agency has suspended, revoked or denied your 
export privileges. It is your responsibility to comply with the latest United States export 
regulations, and you will defend and indemnify LeCroy from and against any damages, fines, 
penalties, assessments, liabilities, costs and expenses (including reasonable attorneys' fees and 
court costs) arising out of any claim that the Software Product, Documentation, or other 
information or materials provided by LeCroy hereunder were exported or otherwise accessed, 
shipped or transported in violation of applicable laws and regulations. 

7. RISK ALLOCATION.

 

7.1 No Warranty. THE SOFTWARE PRODUCT IS NOT ERROR-FREE AND THE SOFTWARE 
PRODUCT AND SUPPORT SERVICES IS/ARE BEING PROVIDED "AS IS" WITHOUT 
WARRANTY OF ANY KIND.  LECROY, FOR ITSELF AND ITS SUPPLIERS, HEREBY 
DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, ORAL OR WRITTEN, 
WITH RESPECT TO THE SOFTWARE PRODUCT OR ANY SUPPORT SERVICES INCLUDING, 
WITHOUT LIMITATION, ALL IMPLIED WARRANTIES OF TITLE OR NON-INFRINGEMENT, 
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY, INTEGRATION, 
VALIDITY, EXCLUSIVITY, MERCHANTABILITY, NON-INTERFERENCE WITH ENJOYMENT, 
FITNESS FOR ANY PARTICULAR PURPOSE, AND ALL WARRANTIES IMPLIED FROM ANY 
COURSE OF DEALING OR USAGE OF TRADE. YOU ACKNOWLEDGE THAT NO 
WARRANTIES HAVE BEEN MADE TO YOU BY OR ON BEHALF OF LECROY OR 
OTHERWISE FORM THE BASIS FOR THE BARGAIN BETWEEN THE PARTIES. 

7.2. Limitation of Liability.  LECROY’S LIABILITY FOR DAMAGES FOR ANY CAUSE 
WHATSOEVER, REGARDLESS OF THE FORM OF ANY CLAIM OR ACTION, SHALL NOT 
EXCEED THE GREATER OF THE AMOUNT ACTUALLY PAID BY YOU FOR THE SOFTWARE 
PRODUCT OR U.S.$5.00; PROVIDED THAT IF YOU HAVE ENTERED INTO A SUPPORT 
SERVICES AGREEMENT WITH LECROY, LECROY’S ENTIRE LIABILITY REGARDING 
SUPPORT SERVICES WILL BE GOVERNED BY THE TERMS OF THAT AGREEMENT.  
LECROY SHALL NOT BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE, LOSS OF 
DATA, INTERRUPTION OF BUSINESS, NOR FOR INDIRECT, SPECIAL, INCIDENTAL, 
CONSEQUENTIAL OR EXEMPLARY DAMAGES OF ANY KIND, WHETHER UNDER THIS 
EULA OR OTHERWISE ARISING IN ANY WAY IN CONNECTION WITH THE SOFTWARE 

Содержание 6000 SERIES


























































































































































































































































































































































































































Отзывы:

Нет отзывов