manualshive.com logo in svg

LeCroy 6000 SERIES, Руководство оператора, Страница: 37 / 409

Поделиться
Скачать
LeCroy 6000 SERIES Скачать руководство пользователя страница 37

 

WR6K-OM-E Rev A 

ISSUED: October 2003 

35

 

EULA confidential.   Nothing herein shall prevent a receiving party from disclosing all or part of 
the Confidential Information as necessary pursuant to the lawful requirement of a governmental 
agency or when disclosure is required by operation of law; provided that prior to any such 
disclosure, the receiving party shall use reasonable efforts to (a) promptly notify the disclosing 
party in writing of such requirement to disclose, and (b) cooperate fully with the disclosing party in 
protecting against any such disclosure or obtaining a protective order.  Money damages will not 
be an adequate remedy if this Section 4.3 is breached and, therefore, either party shall, in 
addition to any other legal or equitable remedies, be entitled to seek an injunction or similar 
equitable relief against such breach or threatened breach without the necessity of posting any 
bond.  As used herein, “Confidential Information” means LeCroy pricing or information concerning 
new LeCroy products, trade secrets (including without limitation all internal header information 
contained in or created by the Software Product, all benchmark and performance test results and 
all Documentation) and other proprietary information of LeCroy; and any business, marketing or 
technical information disclosed by LeCroy, or its representatives, or you in relation to this EULA, 
and either (i) disclosed in writing and marked as confidential at the time of disclosure or (ii) 
disclosed in any other manner such that a reasonable person would understand the nature and 
confidentiality of the information.  Confidential Information does not include information (A) 
already in the possession of the receiving party without an obligation of confidentiality to the 
disclosing party, (B) hereafter rightfully furnished to the receiving party by a third party without a 
breach of any separate nondisclosure obligation to the disclosing party, (C) publicly known 
without breach of this EULA, (d) furnished by the disclosing party to a third party without 
restriction on subsequent disclosure, or (e) independently developed by the receiving party 
without reference to or reliance on the Confidential Information. 

4. TERMINATION.

  This EULA will remain in force until termination pursuant to the terms hereof.  

You may terminate this EULA at any time.  This EULA will also terminate if you breach any of the 
terms or conditions of this EULA.  You agree that if this EULA terminates for any reason, the 
License will immediately terminate and you will destroy all copies of the Software Product (and all 
Derivatives), installed or otherwise, the Documentation, and the Confidential Information  (and all 
derivatives of any of the foregoing) that are in your possession or under your control. The 
provisions of Sections 1.3, 4, 6, 7, 8, and 9 will survive any termination or expiration hereof. 

5. U.S. GOVERNMENT RESTRICTED RIGHTS.

  If any Software Product or Documentation is 

acquired by or on behalf of a unit or agency of the United States Government (any such unit or 
agency, the “Government”), the Government agrees that the Software Product or Documentation 
is “commercial computer software” or “commercial computer software documentation” and that, 
absent a written agreement to the contrary, the Government’s rights with respect to the Software 
Product or Documentation are, in the case of civilian agency use, Restricted Rights, as defined in 
FAR §52.227.19, and if for Department of Defense use, limited by the terms of this EULA, 
pursuant to DFARS §227.7202.  The use of the Software Product or Documentation by the 
Government constitutes acknowledgment of LeCroy’s proprietary rights in the Software Product 
and Documentation.  Manufacturer is LeCroy Corporation, 700 Chestnut Ridge Road, Chestnut 
Ridge, NY 10977 USA. 

Содержание 6000 SERIES


























































































































































































































































































































































































































Отзывы:

Нет отзывов