crystal User Manual
Version: 6.6.0/2
157/459
9. Audio IO
Tx Streams
This area defines the sending streams, which are used to publish audio from the device to the network. The Tx
streams are pre-defined by the crystal standard configuration. In each case, you will see the Tx stream name
and the RAVENNA media channels which are being used.
For Tx streams, the media channels are color-coded as follows: green = the stream is active; grey = the stream
is inactive.
The buttons at the top of the area should not be used unless you wish to
Create
a new stream.
Do NOT use
Toggle
or
Delete
, as these buttons will activate/deactivate or delete the selected Tx streams!
Rx Streams
This area defines the receiving streams, which are required to use audio from the network. The crystal
standard configuration pre-labels the 32 stereo Rx streams and connects them to the RAVENNA sources on the
console. In order to receive audio, you must assign an incoming stream from the network (as described
).
Once a Stream Source has been assigned, then the Rx stream shows its name and the RAVENNA media
channels which are being used.
For Rx streams, the media channels are color-coded as follows: green = correct operation; red = there is either
no connection or no data; orange = the stream is being received but there are drop-outs in the data; grey = the
stream is inactive.
You will also see an icon on the right of each Rx stream which reflects the health statuses:
Ø
Click on the icon to open the statistics window for further information.
Ø
To reset all of the error flags for the Rx streams, click on the
Reset
button.
The buttons at the top of the area should not be used.
In particular, do NOT use
Toggle
or
Delete
, as these buttons will activate/deactivate or delete the selected
Rx streams!
The
Create
button is used in systems other than crystal standard configuration to create a new Rx stream.
