Lantronix 100-120 VAC SLB Скачать руководство пользователя страница 83

Страница: 83 / 344

6: Basic Parameters

SLB™ Branch Office Manager User Guide

the far right in the operation's row. The options that are available for that operation will be

ungreyed. Select one of the following options:

Performance Monitoring Commands

Go to

Performance Monitoring Commands

to view CLI commands which correspond to the web

page entries described above.

Refresh

Refreshes the information on the Performance Monitoring - Operations page.

RTT Results

Displays the round trip time (RTT) results for the selected operation in a

separate window. The results show:



The time that the packet was sent,



The total round trip time for non-jitter probes or the source to destination

time and destination to source time for jitter probes, and



The status for the packet - OK/successful or an error condition.

For more information, see

Round Trip Times

Error Conditions

Accumulated Results

Displays the accumulated statistics for the selected operation in a separate

window. The results show parameters used for the selected operation, and the

minimum, average and maximum round trip times for all probes. For jitter

probes, the results show minimum, average and maximum one way latency

times, as well as jitter results for source to destination and destination to

source. For all probes, a summary of lost packets and error conditions is

displayed.

Содержание 100-120 VAC SLB

























































































































































































































































































































































Результаты поиска

Содержание 100-120 VAC SLB

Отзывы:

Lantronix 100-120 VAC SLB, Руководство пользователя, Страница: 83 / 344

Результаты поиска

Содержание 100-120 VAC SLB

Отзывы: