Lantronix 100-120 VAC SLB Скачать руководство пользователя страница 33

Страница: 33 / 344

3: Installation

SLB™ Branch Office Manager User Guide

Table 3-4 Max Current per Power Cord Used

Safety Precautions

Please follow the safety precautions described below when installing and operating the SLB

branch office manager.

Cover



Do not remove the cover of the chassis. There are no user-serviceable parts inside. Opening

or removing the cover may expose you to dangerous voltage that could cause fire or electric

shock.



Refer all servicing to Lantronix.

Power Plug



When disconnecting the power cable from the socket, pull on the plug, not the cord.



Always connect the power cord to a properly wired and grounded power source. Do not use

adapter plugs or remove the grounding prong from the cord.



Only use a power cord with a voltage and current rating greater than the voltage and current

rating marked on the SLB.



Install the SLB unit near an AC outlet that is easily accessible.



Always connect any equipment used with the product to properly wired and grounded power

sources.

Dimensions

1U, 1.7 in x 18.9 in x 12.4 in

Weight

10 lb.

Temperature

Operating: 0 to 50 °C (32 to 122 °F)
Storage: -20 to 70 °C (-4 to 158 °F)

Relative Humidity

Operating: 10% to 90% non-condensing
Storage: 10% to 90% non-condensing

Current measurement accuracy

1A to 16A

Power Cord Used

Description

SLPP12310-01

Inlet cord: IEC60320/C19 to NEMA 5-15P (15A)

Note:

Unit input current is de-rated to 12A maximum when using this cable.

SLPP12410-01

Inlet cord: IEC60320/C19 to NEMA 5-20P (20A)

Note:

Unit input current is de-rated to 16A maximum when using this cable.

SLPP12810-01

Inlet cord: IEC60320/C19 to Schuko (EU/16A)

SLPP12910-01

Inlet cord: IEC60320/C19 to BS1363 (UK/13A)

SLPP12A08-01

Inlet cord: IEC60320/C19 to AS/NZS 3112 (AU/NZ/15A)

SLPP12C08-01

Inlet cord: IEC60320/C19 to CHINA/GB (CN/16A)

Component (continued)

Description

Содержание 100-120 VAC SLB

























































































































































































































































































































































Результаты поиска

Содержание 100-120 VAC SLB

Отзывы:

Lantronix 100-120 VAC SLB, Руководство пользователя, Страница: 33 / 344

Результаты поиска

Содержание 100-120 VAC SLB

Отзывы: