Lantronix 100-120 VAC SLB Скачать руководство пользователя страница 48

Страница: 48 / 344

4: Quick Setup

SLB™ Branch Office Manager User Guide

Network Settings

Note:

Configurations with the same IP subnet on multiple interfaces (Ethernet or PPP)

are not currently supported.

Date & Time Settings

Administrator Settings

6. Click the

Apply

button to save your entries.

Network Setting

Description

Eth 1 Settings



Obtain from DHCP:

Acquires IP address, subnet mask, hostname and gateway

from the DHCP server. (The DHCP server may not provide the hostname

gateway, depending on its setup.) This is the default setting. If you select this

option, skip to

Gateway



Obtain from BOOTP:

Lets a network node request configuration information from

a BOOTP "server" node. If you select this option, skip to

Gateway



Specify:

Lets you manually assign a static IP address, generally provided by the

system administrator.

IP Address

(if specifying)



Enter an IP address that is unique and valid on your network. There is no default.



Enter all IP addresses in dot-quad notation. Do not use leading zeros in the fields

for dot-quad numbers less than 100. For example, if your IP address is

172.19.201.28

, do not enter

028

for the last segment.

Note:

Currently, the SLB unit does not support configurations with the same IP

subnet on multiple interfaces (Ethernet or PPP).

Subnet Mask

If specifying an IP address, enter the subnet mask for the network on which the SLB

device resides. There is no default.

Default Gateway

The IP address of the router for this network. There is no default.

Hostname

The default host name is slbXXXX, where XXXX is the last 4 characters of the

hardware address of Ethernet Port 1. There is a 64-character limit (contiguous

characters, no spaces). The host name becomes the prompt in the command line

interface.

Domain

If desired, specify a domain name (for example, support.lantronix.com). The domain

name is used for host name resolution within the SLB unit. For example, if abcd is

specified for the SMTP server, and mydomain.com is specified for the domain, if

abcd cannot be resolved, the SLB branch office manager attempts to resolve

abcd.mydomain.com for the SMTP server.

Date & Time Setting Description

Change Date/Time

Select the checkbox to manually enter the date and time at the SLB’s location.

Date

From the drop-down lists, select the current month, day, and year.

Time

From the drop-down lists, select the current hour and minute.

Time Zone

From the drop-down list, select the appropriate time zone.

Administrator

Setting

Description

Sysadmin Password

To change the password (e.g., from the default) enter a Sysadmin Password of up

to 64 characters.

Retype Password

Re-enter the Sysadmin Password above in this field as a confirmation.

Содержание 100-120 VAC SLB

























































































































































































































































































































































Результаты поиска

Содержание 100-120 VAC SLB

Отзывы:

Lantronix 100-120 VAC SLB, Руководство пользователя, Страница: 48 / 344

Результаты поиска

Содержание 100-120 VAC SLB

Отзывы: