Lantronix 100-120 VAC SLB, Руководство пользователя, Страница: 237 / 344

12: Maintenance
SLB™ Branch Office Manager User Guide 237
The Maintenance > Diagnostics page provides methods for diagnosing problems such as network
connectivity and device port input/output problems. You can use equivalent commands on the
command line interface. An additional diagnostic, loopback, is only available as a command.
1. Click the
Maintenance tab and select the Diagnostics option. The following page displays:
Figure 12-7 Maintenance > Diagnostics
2. Select Diagnostics from checklist (one or more diagnostic methods you want to run, or select
All to run them all):
ARP Table
Address Resolution Protocol (ARP) table used to view the IP address-to-hardware
address mapping.
Netstat Displays network connections. If you select the checkbox, select the TCP or UDP
protocol, or select
All
for both protocols to control the output of the Netstat report.
Host Lookup
Select to verify that the SLB branch office manager can resolve the host name into an IP
address (if DNS is enabled). If selected, also enter a host name in the corresponding
Hostname field,
Ping
Select to verify that the host is up and running. If selected, also do the following:

Enter a host name in the corresponding
Hostname
field

Specify Ethernet Port (Both, Eth1 or Eth2)

Check IPv6 if... need text.