Lantronix 100-120 VAC SLB Скачать руководство пользователя страница 170

Страница: 170 / 344

8: Device Ports

SLB™ Branch Office Manager User Guide

170



For Dial-back, the user will be authenticated via PAP or CHAP (configured with the

Authentication setting). For PAP, the Local/Remote list will be used to authenticate the login

and password sent by the PPP peer. For CHAP, the CHAP Handshake Host/User Name and

Secret/User Password will be used to authenticate the CHAP Challenge response sent by the

PPP peer. If the remote peer requests PAP or CHAP authentication from the SLB unit , the

Remote/Dial-out Login and Remote/Dial-out Password will be provided as authentication

tokens. Once authenticated, the SLB device will use the Dial-back Number configured for the

modem - either a fixed number assigned to the modem, or a number associated with the user

that was authenticated (the user must have Allow Dial-back enabled and a Dial-back Number

defined). If the SLB device can determine a dial-back number to use, it will hang up and wait

Dial-back Delay seconds before initiating the dial-back (if the dial-back fails, the SLB unit will

try Dial-back Retries times to dial-back). The SLB unit will dial, and if the remote peer requests

PAP or CHAP authentication, provide the Remote/Dial-out Login and Remote/Dial-out

Password as authentication tokens. Once authenticated, a PPP session will be established

using the Local IP and the Remote IP.



For Dial-on-Demand, the PPP connection will be established when it sees IP traffic destined

for the Remote IP. When this occurs, the SLBdials the Dial-out Number, and if the remote peer

requests PAP or CHAP authentication, provides the Remote/Dial-out Login and Remote/Dial-

out Password as authentication tokens. Once authenticated, a PPP session will be

established using the Local IP and the Remote IP. The PPP connection will stay active until no

IP traffic for the Remote IP is sent for Modem Timeout seconds. Once the timeout has expired,

the PPP connection will be terminated and will not be reestablished for at least Restart Delay

seconds.

Dial-In/Host List

The SLBwaits for a peer to call and establishes a text (command line) connection to the first host

in a Host List that connects. A host list of a prioritized list of SSH, Telnet or raw TCP hosts to

connect to. If Authentication is enabled for the Host List, the user will be prompted for a login and

password, and will be authenticated via the currently enabled authentication methods (Local

Users, NIS, LDAP, etc). Once authenticated, the SLBwill try to connect to each host in the host list

until a successful connection is established.

CBCP Server and CBCP Client

Callback Control Protocl (CBCP) is a PPP option that negotiates the use of callback where the

server, after authenticating the client, terminates the connection and calls the client back at a

phone number that is determined by the CBCP handshake. For more information on CBCP, see

http://technet.microsoft.com/en-us/library/cc957979.aspx

. CBCP is used primarily by Microsoft

PPP peers. CBCP supports two options for determining the number to dial on callback: the client

can specify a user-defined number for the server to dial on callback, or the client can request the

server use an administrator-defined number to dial on callback. Optionally, some servers may also

allow "no callback" as an option.

CBCP Server

The SLB unit waits for a client to call the it, establish a PPP connection, authenticate the user, and

negotiate a dial-back number with the client using CBCP. If the SLB unit is able to determine a

dial-back number to use, it hangs up and calls the dial-back number.
When a call is received, a PPP connection is established, and the user will be authenticated via

PAP or CHAP (configured with the Authentication setting). For PAP, the Local/Remote list will be

used to authenticate the login and password sent by the PPP peer. For CHAP, the CHAP

Handshake Host/User Name and Secret/User Password will be used to authenticate CHAP

Содержание 100-120 VAC SLB

























































































































































































































































































































































Результаты поиска

Содержание 100-120 VAC SLB

Отзывы:

Lantronix 100-120 VAC SLB, Руководство пользователя, Страница: 170 / 344

Результаты поиска

Содержание 100-120 VAC SLB

Отзывы: