Lantronix 100-120 VAC SLB Скачать руководство пользователя страница 107

Страница: 107 / 344

7: Services

SLB™ Branch Office Manager User Guide

107

4. Firmware and Configuration Updates

The client checks for firmware and configuration updates at the interval defined by Interval

between FW and Config Checks. When the client checks for firmware or configuration

updates, Status of Client will display Checked for Content with the date and time the check

was performed. If a firmware update is found, it will be applied to the alternate (non-active)

boot bank, and Status of Client will display Firmware updated with the date and time the

firmware was updated. If a configuration update is found, it will be applied to the current boot

bank, and Status of Client will display Configuration restored with the date and time the

configuration was restored.

To configure ConsoleFlow settings:

1. Click the

Services

tab and select the

ConsoleFlow

option. The following page displays.

Figure 7-13 Services > ConsoleFlow

Содержание 100-120 VAC SLB

























































































































































































































































































































































Результаты поиска

Содержание 100-120 VAC SLB

Отзывы:

Lantronix 100-120 VAC SLB, Руководство пользователя, Страница: 107 / 344

Результаты поиска

Содержание 100-120 VAC SLB

Отзывы: