Lantronix 100-120 VAC SLB Скачать руководство пользователя страница 108

Страница: 108 / 344

7: Services

SLB™ Branch Office Manager User Guide

108

2. Enter the following:

Device Attributes

Registration Host

ConsoleFlow Client

Enables or disables the ConsoleFlow client. This option is enabled by default,

unless an SLB is not configured with a Device ID. When the client is enabled, it

will attempt to register with the

Registration Host

. If this is successful, the

client will attempt to establish a connection with the

Messaging Host

. The

General log (see

SSH/Telnet/Logging on page 85

) will contain messages about

connections made to the Registration Host and Messaging Host.

Status of

Client

displays the last time of actions performed by the client. Note that when

the client is disabled, it may take as long as 30 seconds for the client to

terminate, depending on what actions the client was performing at the time it

was disabled.

Interval between status

updates

Number of minutes between status updates sent from the client to the server.

Valid values are 1 - 60 minutes. The default is 2 minutes.

Interval between FW

and Config Checks

Number of hours between checks for firmware and configuration updates

initiated by the server. Valid values are 1 - 72 hours. The default is 24 hours.

Firmware Updates via

ConsoleFlow

If enabled, firmware updates can be initiated by ConsoleFlow for the SLB. The

device will check for updates per the frequency defined by Interval between FW

and Config Checks, and if a firmware update is found, the update will be

downloaded to the device and applied to the alternate boot bank. Enabled by

default.

Configuration Updates

via ConsoleFlow

If enabled, configuration updates can be initiated by ConsoleFlow for the SLB.

The device will check for updates per the frequency defined by Interval between

FW and Config Checks, and if a configuration update is found, the update will

be downloaded to the device and applied to the current boot bank, and the SLB

will be immediately rebooted. Enabled by default.

Reboot after Firmware

Update

If enabled, the SLB will automatically reboot after a successful firmware update

via ConsoleFlow. Disabled by default.

Device Name

The device name displayed in the ConsoleFlow server UI. Valid characters are

alphanumeric characters, dash "-", and underscore "_". The default is the

device type (SLB) with the last 4 characters of the Eth1 MAC address

appended.

Device Description

Long description that is displayed in the ConsoleFlow server UI.

Device ID

The unique device identifier. The ID is 32 alphanumeric characters. The ID may

be provisioned using Lantronix Provisioning Manager (LPM). Contact Lantronix

Tech Support for more information on LPM.

S/N

Displays the serial number.

Registration Host

Hostname of the server the client registers with. The

Host Name

should start

with api.

Registration Port

The TCP port on the Registration Host. Defaults to 443.

Use HTTPS for

registration

If enabled, HTTPS (instead of HTTP) is used for registration. Enabled by

default.

Validate certificates with

HTTPS

If enabled, use a certificate authority to validate the HTTPS certificate. A

certificate authority file can be uploaded on the

Web Server

page. Disabled by

default.

Содержание 100-120 VAC SLB

























































































































































































































































































































































Результаты поиска

Содержание 100-120 VAC SLB

Отзывы:

Lantronix 100-120 VAC SLB, Руководство пользователя, Страница: 108 / 344

Результаты поиска

Содержание 100-120 VAC SLB

Отзывы: