Lantronix 100-120 VAC SLB Скачать руководство пользователя страница 81

Страница: 81 / 344

6: Basic Parameters

SLB™ Branch Office Manager User Guide

For jitter probes, positive (increasing latency) and negative (decreasing latency) statistics are

shown, as well as the number of positive or negative jitter samples in each direction, and the sum

and (and sum squared) of the positive or negative jitter times. These numbers give a summary of

how much variation there was in latency times and if the variation was small or large.

Probe 7/udp-jitter-probe, operation udpjitter_170628_002049.dat:

Operation Type:

UDP Jitter to 10.0.1.93:50505

50 packets sent 60 ms apart, timeout 1000 msec

Operation Start Time: 17-06-28 00:20:49.071

Last Packet RTT: 69.334 msec

Round Trip Time Results:

Number of RTT: 50

RTT Min/Avg/Max: 57.327/63.863/89.376 msec

One-way Latency Results:

Number of samples: 50

Source to Destination Min/Avg/Max: 23.174/27.467/45.206 msec

Destination to Source Min/Avg/Max: 34.068/36.396/54.166 msec

Jitter, Source to Destination:

Number of Samples: 49

Positive and Negative Min/Avg/Max: 1/4/20 msec

Positive Min/Avg/Max: 1/7/20 msec

Positive Number Of/Sum of All/Sum of All Squared: 13/100/1090 msec

Negative Min/Avg/Max: 1/5/20 msec

Negative Number Of/Sum of All/Sum of All Squared: 17/96/1018 msec

Jitter, Destination to Source:

Number of Samples: 49

Positive and Negative Min/Avg/Max: 10/3/20 msec

Positive Min/Avg/Max: 10/12/20 msec

Positive Number Of/Sum of All/Sum of All Squared: 7/90/1300 msec

Negative Min/Avg/Max: 10/12/20 msec

Negative Number Of/Sum of All/Sum of All Squared: 8/100/1400 msec

Number of Successes: 49

Number of Errors: 1

Lost Packet: 0 (0%)

Out of Sequence: 0

Late Arrival: 1

Miscellaneous Error: 0

Table 6-9 Error Conditions

The following error conditions are detected by the probes. Except where noted, the RTT results for

a packet with errors will not be counted in the accumulated statistics.

Error Condition

Description

Timeout

A response was never received for the packet. These packets are listed as

Lost Packets under the accumulated statistics.

Late Arrival

A response was received for a packet, but the response was received after

the timeout configured for the probe. The SLB will wait at most 2 times the

probe's timeout for late arrival packets. The RTT results will be included in

the accumulated statistics.

Содержание 100-120 VAC SLB

























































































































































































































































































































































Результаты поиска

Содержание 100-120 VAC SLB

Отзывы:

Lantronix 100-120 VAC SLB, Руководство пользователя, Страница: 81 / 344

Результаты поиска

Содержание 100-120 VAC SLB

Отзывы: