Lantronix 100-120 VAC SLB Скачать руководство пользователя страница 175

Страница: 175 / 344

9: USB Port

SLB™ Branch Office Manager User Guide

175

3. Enter the following fields.

Data Settings

Note:

Check the modem’s equipment settings and documentation for the proper

settings. The attached modem must have the same settings.

GSM/GPRS Settings

Modem Settings

Note:

Depending on the

State

and

Mode

you select, different fields are available.

Baud

The speed with which the device port exchanges data with the attached serial

device.
From the drop-down list, select the baud rate. Most devices use

9600

for the

administration port, so the device port defaults to this value. Check the equipment

settings and documentation for the proper baud rate.

Data Bits

Number of data bits used to transmit a character. From the drop-down list, select

the number of data bits. The default is

data bits.

Parity

Parity checking is a rudimentary method of detecting simple, single-bit errors.

From the drop-down list, select the parity. The default is

none

Stop Bits

The number of stop bit(s) used to indicate that a byte of data has been transmitted.

From the drop-down list, select the number of stop bits. The default is

Flow Control

A method of preventing buffer overflow and loss of data. The available methods

include

none, xon/xoff (

software), and

RTS/CTS

(hardware). The default is

none

Dial-out Mode

Select either GPRS or GSM (Global System for Mobile communication) as the

type of dial-out connection.

PIN

Enter PIN (personal identification number) for accessing the GSM/GPRS card.

Retype PIN

Re-enter PIN (personal identification number) for accessing the GSM/GPRS card.

PPP Compression

Select to enable negotiation of data compression over PPP links. Disabled by

default.

Auto-acquire DNS

Select to enable the SLB branch office manager to acquire up to three DNS

servers by means of GPRS (General Packet Radio Service). Enabled by default.

Negotiated IP

IP address associated with the GPRS connection.

GPRS Context

Command to specify the protocol data packet (PDP) context parameter values.

GSM Bearer Svc

Command to select the bearer service, data rate, and connection element to use

when data call originate.

State

Indicates whether an external modem is attached to the device port. If enabling,

set the modem to dial-out, dial-in, dial-back, dial-on-demand, dial-in/host list, or

dial in & dial-on-demand. Disabled by default.

Содержание 100-120 VAC SLB

























































































































































































































































































































































Результаты поиска

Содержание 100-120 VAC SLB

Отзывы:

Lantronix 100-120 VAC SLB, Руководство пользователя, Страница: 175 / 344

Результаты поиска

Содержание 100-120 VAC SLB

Отзывы: