Lantronix 100-120 VAC SLB, Руководство пользователя, Страница: 122 / 344

8: Device Ports
SLB™ Branch Office Manager User Guide 122
Commands
2. Click the Apply button.
Device Port - Sensorsoft Device
Devices made by Sensorsoft are used to monitor environmental conditions.
1. In the
Connected to field above the IP Settings section of the
Device Port Settings
page,
select Sensorsoft .
2. Click the Device Commands link. The following page displays:
Figure 8-7 Devices > Device Ports > Sensorsoft
3. Select a port and enter or view the following information:
Infeed Status Click the link to view the status of the data the SLP unit is receiving.
System Info Click the link to see system information pertaining to the SLP power manager.
Restart SLP To restart the SLP power manager, select the checkbox.
Control Outlet For Tower A or Tower B , select All Outlets or Single Outlet and the number
of the outlet to be controlled (1-8 for the SLP8 or 1-16 for the SLP16 devices)
and select the command for the outlet (No Action, Power On, Power Off, Cycle
Power). No Action is the default.
Dev Port Displays the number of the SLB port.
Device Port Name Displays the name of the SLB port.
Temp Current temperature (degrees Celsius) on the device the sensor is monitoring.
Low Temp Enter the temperature (degrees Celsius) permitted on the monitored device below
which the SLB branch office manager sends a trap.
High Temp Enter the temperature (degrees Celsius) permitted on the monitored device above
which the SLB unit sends a trap.
Use °F Display and set the temperature for this device in degrees Fahrenheit, instead of
Celsius, which is the default.
Humidity (%) Current relative humidity on the device the sensor is monitoring.
Low Humidity Enter the relative humidity permitted on the device the sensor is monitoring below
which the sensor sends a trap to the SLB device.