Lantronix 100-120 VAC SLB Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 344

Lantronix 100-120 VAC SLB Скачать руководство пользователя страница 45

4: Quick Setup

SLB™ Branch Office Manager User Guide

45

Note:

If the prompt does not display, make sure you are no longer in edit mode.

11. Use the left/right arrow buttons to select

Yes

, and press the

Enter

button.

12. To review the saved settings, press the up or down arrows to step through the current settings.
When you are done, the front panel returns to the clock display. The network port resets to the

new settings, and you can connect to your IP network for further administration. You should be

able to SSH to the SLB branch office manager through your network connection, or access the

Web interface through a Web browser.

Restoring Factory Defaults

To use the LCD display to restore factory default settings:

1. Press the right arrow button to move to the last option,

Release

.

2. Use the down arrow to move to the

Restore Factory Defaults

option. A prompt for the 6-digit

Restore Factory Defaults password displays.

3. Press

Enter

to enter edit mode.

4. Using the left and right arrows to move between digits and the up and down arrows to change

digits, enter the password (the default password is 999999).

Note:

The Restore Factory Defaults password is only for the LCD. You can change it at

the command line interface using the

admin keypad password

command.

5. Press

Enter

to exit edit mode. If the password is valid, a

Save Settings? Yes/No

prompt

displays.

6. To initiate the process for restoring factory defaults, select

Yes

. When the process is

complete, the SLB branch office manager reboots.

Limiting Sysadmin User Access

For security purposes, full administrative access to the SLC or SLB via the default sysadmin local

user account can be limited to only the front console port of the SLC or SLB device.
To configure this:
1. Enable the Sysadmin access limited to Console Port option on the Local/Remote Users web

page.

2. Enable a remote authentication method (such as or LDAP) and configure the

remote authentication method to be first in the order of methods used.

3. Create a remote user account with full administrative rights.
4. Uncheck the Attempt next method on authentication rejection checkbox on the Authentication

Methods web page.

These steps will prevent any local users from logging in, restrict the default sysadmin local user to

the front console port, and allow a user with administrative rights to login, as long as remote

authentication is working.

«
...
43
44
45
46
47
...
»

Содержание 100-120 VAC SLB

























































































































































































































































































































































Отзывы:

Нет отзывов