Lantronix 100-120 VAC SLB Скачать руководство пользователя страница 66

Страница: 66 / 344

6: Basic Parameters

SLB™ Branch Office Manager User Guide

To enable IP filters:

1. Enter the following:

Configuring IP Filters

The administrator can add, edit, delete, and map IP filters.

Note:

A configured filter has no effect until it is mapped to a network interface.

See

Mapping a Ruleset on page 69.

To add an IP filter:

1. On the

Network > IP Filter

page, click the

Add Ruleset

button. The following page displays:

Enable IP Filter

Select the

Enable IP Filter

checkbox to enable all filters, or clear the checkbox

to disable all filters. Disabled by default.

Packets Dropped

Displays the number of data packets that the filter ignored (did not respond to).

View only.

Packets Rejected

Displays the number of data packets that the filter sent a “rejected” response to.

View only.

Test Timer

Timer for testing IP Filter rulesets. Select No to disable the timer. Select Yes,

minutes (1-120) to enable the timer and enter the number of minutes the timer

should run. The timer automatically disables the IP Filters when the time

expires.

Time Remaining

Indicates how many minutes are left on the timer before it expires and IP Filters

disabled. View only.

Содержание 100-120 VAC SLB

























































































































































































































































































































































Результаты поиска

Содержание 100-120 VAC SLB

Отзывы:

Lantronix 100-120 VAC SLB, Руководство пользователя, Страница: 66 / 344

Результаты поиска

Содержание 100-120 VAC SLB

Отзывы: