Lakeshore 330 Скачать руководство пользователя страница 56

Страница: 56 / 104

Lake Shore Model 330 Autotuning Temperature Controller User’s Manual

4-14

Remote Operation

TERM?

Terminator

Query.

Input:

TERM?

Returned:

Returns the current terminating character type:

= Carriage return and line feed (CR)(LF

EOI

)

= Line feed and carriage return (LF)(CR

EOI

)

= Line feed (LF

EOI

)

= No terminating characters – EOI line set with last data byte if enabled (End)

Remarks:

This command works only with the IEEE-488 Interface.

4.3.4 Display

Commands

Display commands allow the interface to act as a virtual display. Transfer display data, as well as format.

CCHN

Set Control Channel to A or B.

Input:

CCHN A

, or

CCHN B

Returned:

Nothing

Remarks:

Sets control channel to sensor A or B. Do not combine channel, control unit, and setpoint
changes. Allow one controller update cycle (½ second) between these commands so the

Model 330 interprets them correctly.

Example:

CCHN A[term]

changes the control channel to A.

CCHN?

Control Channel Query.

Input:

CCHN?

Returned:

Remarks:

Returns the current control channel setting:

= channel A,

= channel B.

CDAT?

Control Sensor Data Query.

Input:

CDAT?

Returned:

±000.00

Remarks:

Returns control sensor data. A free field is active here. The value returned is 7 characters: a

sign, 5 digits and a decimal point. The last digit may be a null.

Example:

+1.2345[term]

Typical response for a voltage query.

-123.40[term]

Typical response for a degrees Celsius query.

+234.50[term]

Typical response for a kelvin or degrees Celsius query.

CUNI

Set Units for the Control Channel.

Input:

CUNI K

CUNI C

, or

CUNI S

Returned:

Nothing

Remarks:

Set control channel units: K = kelvin, C = Celsius, S = appropriate sensor units (volts, ohms,
or millivolts).

Example:

If operating in kelvin with a Model 330-01,

CUNI S[term]

makes the units volts – the sensor

units for a diode sensor. The Model 330-02 platinum controller has sensor units of ohms, and

the Model 330-04 thermocouple controller has sensor units of millivolts.

CUNI?

Control Units Query.

Input:

CUNI?

Returned:

Remarks:

Current control units setting: K = kelvin, C = Celsius, V = volts, R = Ohms, M = millivolts.

Содержание 330









































































































Результаты поиска

Содержание 330

Отзывы:

Lakeshore 330, Руководство пользователя, Страница: 56 / 104

Результаты поиска

Содержание 330

Отзывы: