Multi Edit Mode
COMMON Page
7-40
COMMON Page
The COMMON page contains parameters that affect all zones in the current Multi.
Tempo
When Clock Source is set to Internal, use the Tempo parameter to set the Multi tempo in
BPM (beats per minute). The Multi Tempo sets the tempo of any tempo based effects, and
can also be used to sync the tempo of Arpeggiators and Riffs on different Zones.
You can also set the tempo using the TAP button or Tempo knob (located in the front panel
TEMPO section). To set the tempo press the TAP button a few times at the desired rate, or
use the TEMPO knob.
When Clock Source is set to External, the Tempo parameter disappears from the display.
Clock Source
When Clock Source is set to Internal, the Multi will determine its tempo with the Tempo
field. When Clock Source is set to External, the Multi can be synced to the tempo of an
external MIDI device, which must send MIDI clock data to the PC4 via MIDI or USB.
KB3 Channel
If KB3 Programs are selected for more than one Zone, this parameter specifies which MIDI
Channel has priority to load a KB3 Program. Only one KB3 Program can be loaded at a
time. If you want a KB3 Program to play in a zone, set the KB3 channel to the channel of
the Zone.
Содержание Flash Play PC4
Страница 1: ... It s the sound Part Number 910587 002 Rev B ...
Страница 9: ... ix MIDI Implementation A 1 Specifications B 1 Index I 1 ...
Страница 289: ... 8 40 ...
Страница 328: ... 10 7 ...