manualshive.com logo in svg

Kurzweil Flash Play PC4, Руководство музыканта

Музыканты, вы можете бесплатно скачать руководство пользователя "Kurzweil Flash Play PC4" с нашего сайта. В этом руководстве вы найдете все необходимые инструкции для использования этого удивительного инструмента. Загрузите его сейчас с manualshive.com и начните создавать музыку своей мечты.

Поделиться
Скачать
background image

Multi Edit Mode

RIFF Page

7-35

so. If the drum riff is started first, the bass riff will see that as the first available riff to sync to 

and will do so. This can be very handy if you have multiple riffs and want to do some live 

remixing; you could have the drums drop out, and—as long is there is a riff playing—they 

will sync back up when triggered again. 
You can also choose First Arp Available, which behaves the same way as First Riff Available, 

but makes your riff look for the first available arpeggiator to sync to. A setting of First 

Available 

will sync the riff to the first available riff, arpeggiator, or song from Song mode. 

A setting of Main Song will sync the riff to the song currently loaded in Song mode (useful 

when recording a Multi into Song Mode). See for 

“Recording A Multi To Song Mode” on 

page 6-11

 for details. 

 Note:

 If you have multiple riffs or arpeggiators already playing when using First Riff 

Available, First Arp Available, or First Available for the current riff, the current riff will sync 

to the riff or arpeggiator of the lowest numbered zone that has a riff or arpeggiator playing. 

Trigger SyncType

The Trigger SyncType parameter allows you to choose how your riff will sync to other riffs, 

arpeggiators, and Songs (in combination with the Trigger SyncZone parameter). 
With Trigger SyncType set to None, the riff will start playing as soon as it is triggered. It will 

not sync to anything. With Trigger SyncType set to Down Beat, if there is already something 

playing to sync to, the current riff will wait for the Down Beat of the next measure before 

starting; so, you can trigger the riff to start ahead of time, and have it start in sync at the 

Down Beat of the next measure. With Trigger SyncType set to Any Beat, if there is already a 

something playing to sync to, the riff will wait only until the next beat. Depending on when 

you trigger the riff, it will sync up, but it may be on an upbeat or a Down Beat.
With Trigger SyncType set to Down Beat Wait, the riff will wait for the Down Beat of the 

next measure to start. The difference from Down Beat is that if there is nothing playing to 

sync to, the riff will not start. This can be useful if you want to start multiple riffs synced 

to one riff. You could have a bass riff set to Down Beat Wait, for instance, and trigger the 

riff while no other riffs are running. As soon as you start another riff, the bass riff will start 

playing as well (provided that it is set to sync to another riff or to the first available riff.) If 

another riff is already running, Down Beat Wait behaves just like Down Beat.
With Trigger SyncType set to Any Beat Wait, the riff will wait for the next beat to start. The 

difference from Any Beat is that if there is nothing playing to sync to, this riff will not start. 

This can be useful if you want to start multiple riffs synced to one riff. You could have a bass 

riff set to Any Beat Wait, for instance, and trigger the riff while no other riffs are running. As 

soon as you start another riff, the bass riff will start playing as well (provided that it is set to 

sync to another riff or the first available). If something is already playing to sync to, Any Beat 

Wait behaves just like Any Beat.

Содержание Flash Play PC4
















































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Flash Play PC4

Zagg Slim Book Pro Instructions Manual preview
Slim Book Pro
Бренд: Zagg Страницы: 24
GeBe KP1204 Driver Setup Manual preview
KP1204
Бренд: GeBe Страницы: 11
Logitech Mini Controller TV730 Setup Manual preview
Mini Controller TV730
Бренд: Logitech Страницы: 16
Cherry G81-8000-LPBUS Specifications preview
G81-8000-LPBUS
Бренд: Cherry Страницы: 3
Brookstone 839115 Quick Manual preview
839115
Бренд: Brookstone Страницы: 12
Nokia SU-42 User Manual preview
SU-42
Бренд: Nokia Страницы: 8
Nokia Power Keyboard SU-42 User Manual preview
Power Keyboard SU-42
Бренд: Nokia Страницы: 8
Linsay CH-K010 User Manual preview
CH-K010
Бренд: Linsay Страницы: 4
Cherry G84-4400 Technical Data preview
G84-4400
Бренд: Cherry Страницы: 2
Optimus Concertmate 42-4035 Owner'S Manual preview
Concertmate 42-4035
Бренд: Optimus Страницы: 24
Optimus Concertmate 975 Owner'S Manual preview
Concertmate 975
Бренд: Optimus Страницы: 28
Johnson Controls G891 Installation Sheets Manual preview
G891
Бренд: Johnson Controls Страницы: 8
Waeco MAGIC WATCH MWE-150-2DIS Installation And Operating Manual preview
MAGIC WATCH MWE-150-2DIS
Бренд: Waeco Страницы: 200
Directed Electronics VIPER 4103XV Owner'S Manual preview
VIPER 4103XV
Бренд: Directed Electronics Страницы: 28
Novation FLkey Mini User Manual preview
FLkey Mini
Бренд: Novation Страницы: 36
Novation FLKEY 37 User Manual preview
FLKEY 37
Бренд: Novation Страницы: 41
Kanex K166-1126 User Manual preview
K166-1126
Бренд: Kanex Страницы: 2
iClever IC-BKO8 User Manual preview
IC-BKO8
Бренд: iClever Страницы: 7

Бренды по названию

Популярные бренды

Загрузить еще бренды