Kurtz Ersa HR 600/2, Перевод оригинального руководства по эксплуатации, Страница: 80 / 169

6 | Function description
The user interface
6.4.4.1 The parameter window [Actual parameters]
The [Profile parameters] of the currently active profile are displayed in this win-
dow.
ü To display the [Actual parameters] parameter window:
a) Enable the [Actual parameters] tab.
29.11.2014 12:47
Soldering
Placement
Profile library
Archive
Sensor Automation Component Board Profiles
Actual parameters
Parameters Value
Profile parameters
Adaptor (head) Head position
Save target position
Actual parameters Data table System settings System info
X-Axis Y-Axis Z-Axis Angle of rotation
Tracking ID
Recording date
PCB pos. X
PCB pos. Y
Document name
Bottom left
Profile
Profile printout
Profile ID
User
Desoldering
parameters
Fig. 22: The [Actual parameters] parameter window
ð If you have enabled a [Profile], you can display the selected parameters in the
parameter window [Actual parameters]:
– Top table row: Fundamental profile parameters
– Table left Detailed profile parameters
– [Profile parameters] frame on the right: Display of the [Profile settings] tab
with the graphic of the gradients. With regard to this, please read the chapter
Adjusting gradients in the [Profile setting] tab [
} 112].
Ersa GmbH 3BA00207_01 Operating Instructions HR 600_2 | Rev. 3 80 / 169