Kurtz Ersa HR 600/2, Перевод оригинального руководства по эксплуатации, Страница: 117 / 169

6 | Function description
Working with the HR 600/2 unit
6.5.2.4.5 Customizing the placement process in the [Placement] tab
The placement process involves picking up the component from the glass plate or
dip module and putting it down onto the PCB.
You can now adjust the placement process to your requirements. You can make
settings affecting [Automation] and [Placement mode] and define target coordin-
ates for component placement.
ü To adjust the placement process:
a) Enable the [Profiles] tab in the [Placement] window.
ð
The [Placement] window is displayed.
Show process instructions
Library
Soldering
Placement
Profile library
Archive
Save target position
Actual parameters
Data table System settings System info
X-Axis Y-Axis Z-Axis Angle of rotation
Profile parameters
Value Parameters
Profile
Document name
Tracking ID
Profile ID
Recording date
User
Profile printout
Bottom left
Board
Profile
Component Sensor Automation Adaptor (head) Head position
Profile library
Actual parameters
Search for profiles
Show template profiles
Add
Delete
Search for duplicates
Overwrite
Reset calibration value
Activate
Profile parameters
Search term
Desoldering parameters
Administrator
Pin 1
No automation
Auto. Print
Auto. Dip
Component filter
Undefined
Invert target image
Invert component image
Drop height
Dropping and define the discharge height
Setting down and move until it touches
Placement mode
Target-Y
Target-X
Target position
Automation
Online-HR 600 Profiles
Common
settings
Profile settings Configuration Placemen
t
Image and
document
Adaptor (head) Sensor Automation Component Board Profile name
Steps
Steps
Fig. 48: The window [Placement]: The status bar at the bottom of the screen shows the current position coordinates.
Automation
The use of the DIP & Print station is described in document [3BA00199]. The DIP &
Print Template picture shows No. 21 in the Overview of the machine parts [
}
52].
When using a DIP & Print Station, the following functions are available to automate
the placement process :
[No automation]: in this case, the component must lie on the glass plate. The fol-
lowing steps are performed automatically:
– The head moves to the landing surface.
– The pick-and-place nozzle collects the component on the glass plate and aligns
it.
– The pick-and-place nozzle places the component onto the landing surface.
[Auto. Print]: in this case, the print template must be incorporated and the com-
ponent lie on the print template. The following steps are performed automatically:
– The head moves to the landing surface.
– The pick-and-place nozzle collects the component on the print template and
moves to the glass plate. Here, the component is aligned.
Ersa GmbH 3BA00207_01 Operating Instructions HR 600_2 | Rev. 3 117 / 169