KUHN EL162, Руководство оператора

Страница: 132 / 144

EL162
132
11. - Troubleshooting guide
KN146AGB_L
Cultiplow
11. Troubleshooting guide

Problem

Cause

Remedy
Noisy drive when lifting the
machine.
Top link of 3-point hitch badly
positioned/adjusted. Position top link parallel to the
lower links.
Excessive lifting height. Limit the lift linkage stroke.
Noisy drive during work.
Machine tilted to the front or rear
(excessive pitch angle).
Lengthen or shorten top link to
set the machine horizontally
during work.
Insufficient machine side to side
stabilization.
Adjust stabilizers of lower links to
prevent machine side to side or
up and down movements.
Excessive power requirement
(Very wet working conditions).
Working depth too deep.
Set and control the working
depth.
Incorrect position of hood and
hood extension. Adjust position of hood and hood
extension.
Rotor speed too high.
Reduce speed by changing
gearwheels in the gearbox.
Wrong rotor choice.
Choose a rotor adapted to the
working conditions.
Excessive power requirement
(Dry working conditions).
Working depth too deep.
Set and control the working
depth.
Excessively worn tools.
Replace the whole set of tools to
ensure rotor balance.
Rotor speed too high.
Reduce speed by changing
gearwheels in the gearbox.
Wrong rotor choice.
Choose a rotor adapted to the
working conditions.
Important ground projections to
the rear. Incorrect position of hood and
hood extension. Adjust position of hood and hood
extension.
Tilth is too coarse.
Excessive ground speed. Reduce groundspeed.
Insufficient rotor speed.
Increase rotor speed using the
gearbox.
Incorrect position of hood and
hood extension. Adjust position of hood and hood
extension.
Wrong rotor choice.
Choose a rotor adapted to the
working conditions.