KUHN EL162, Руководство оператора

Страница: 88 / 144

EL162
88
9. - Optional equipment
KN146AGB_L
Cultiplow

Working depth adjustment
- Adjust the track eradicator working depth using pin
(2).
- Remove R-clip (1).
- Remove pin (2).
- Place track eradicator arm (3) in the position
corresponding to the required depth.
- Insert pin (2) in hole corresponding to the required
depth.
- Secure using R-clip (1).
The working depth of the track eradicators must
not exceed 100 mm (4’’).

Lateral adjustment
- Loosen nuts of brackets (1).
- Track eradicators must be mounted centrally to the
tractor wheels.
- Tighten nuts.
- Fit additional track eradicators when using wide
tyres or dual wheels.
2 track eradicators with traction bolt overload
mechanism.
2 track eradicators with spring overload
mechanism.
- If the distance between track eradicators
and tyres is too small, fit lower links in
forward position.
- Check that distance between guards is
below : 60 mm (2’’).
- Readjust if necessary.
3
2
1
1
1