KUHN EL162, Руководство оператора

Страница: 79 / 144

9. - Optional equipment
EL162
79
KN146AGB_L
Cultiplow
9.2 Front wheels
The front wheels provide improved machine
stability.
The front wheels can be fitted in the following cases:
• On machines fitted with a roller.
• On machines fitted with a Cultirotor rotor and
without roller.
9.2.1 Working depth adjustment
The working depth is set by the wheel height:
- Lift the machine slightly off the ground.
- Unlock and remove lynch pin (1).
- Remove pin (2).
- Position wheel arm in hole corresponding to the
required setting.
- Insert pin (2).
- Secure with lynch pin.
- Proceed the same way on the other side.
- Adjust both sides to the same setting.
Relations between the working depth and the
position of the wheels:
• (a) minimum: 80 mm (3’’) (approximately).
• (b) max. :
250 mm (9.8’’) (approximately) .
1
2
h
H
a
b