8. - Instructions for work
EL162
61
KN146AGB_L
Cultiplow
Working depth adjustment
With crumbler roller.
With Maxicrumbler roller.
With Packer roller.
With PK2 Packer roller.
With Maxipacker roller.
With Packliner roller.
With Steelliner roller.
The working depth is set by the roller height.
Overhang
The roller rear offset adjustment enables adjusting
the machine overhang and the rear hood opening.
The roller can be adjusted in 4 different positions.
From the working position:
- Remove bolts (1) (3 on each machine side).
-
Position roller in holes corresponding to the
required adjustment.
- Reinstall and tighten screws (1):
• Torque: 21 daNm (155 lbf ft).
- Proceed the same way on the other side.
- During deep work, the hood travel range can
require the roller to be fitted further to the rear (a).
- When working at shallow depth, the hood travel
range allows fitting the roller in fully advanced
position (b).
1
a
b
Содержание EL162
Страница 2: ......
