KUHN BELT-DRIVEN MINOTOR 3060, Руководство оператора

Страница: 57 / 64

57
Remplissage
Vidange
Niveau
Figure 1
STORAGE
- If the machine is not to be used for a long period, prepare it for storage:
- Clean the body (inside, outside and underside), arm, grab and cover with a jet spray. Remove any
product build-up. If necessary, repaint any surface in danger of rusting. Grease the underbody.
- When using a pressure washer, beware of sensitive components (ram joints, electrical connections,
belt , etc...).
- Grease the ram rods to protect them from moisture and dust.
- Grease the drive chains.
- Clean all greasing points and joints. Grease.
- Wherever possible, store your machine in a sheltered area, on blocks, to isolate it from ground
damp.
- Check tyre pressure and wheel bolt tightness.
Fig. 1
Fill plug
Drain plug
Level gauge
plug
OIL CHANGE
The oil needs to be changed in:
- the conveyor reduction gear unit, quantity 0.5 litres (Figure 1)
- the gearbox, quantity 5 litres (Figure 2).
Change the oil after the first 50 hours of work, then every 1500 hours thereafter.
Check the oil level regularly to prevent abnormal damage to the units.
Remember! The oil in the optional hydraulic unit also needs to be changed (refer to the OPTIONS
section).
Fill
Drain
Level