KUHN BELT-DRIVEN MINOTOR 3060, Руководство оператора

Страница: 25 / 64

25
RAISING/LOWERING THE ARM
Lever B
Push the lever up to raise the arm.
Pull the lever down to lower the arm.
OPENING/CLOSING THE GRAB
Lever B
Turn lever to the left to open the grab out of the body.
Turn lever to the right to bring the grab in towards the body.
CHANGING THE TURBINE SPEED
Lever C
Push the lever for a turbine speed of 270 min -1 . This speed is used for silage distribution.
Pull the lever for a turbine speed of 540 min
-1
. This speed is used for straw blowing.
ADJUSTING THE CONVEYOR SPEED
Switch D
Turn switch C to the left to increase the conveyor speed.
Turn switch C to the right to reduce the conveyor speed.
The conveyor speed increases on a scale from 0 to 10. The current speed is indicated on the front of
the machine.
ON MACHINES EQUIPPED WITH A MINERALS HOPPER
Switch F
Push the switch up to stop the hopper.
Push the switch down to run the hopper.
Switch E
Push the switch to the left to increase the auger speed.
Push the switch to the right to reduce the auger speed.
The auger speed increases on a scale from 0 to 10. The current speed is indicated on the front of the
machine.
The injection auger runs only when the mixing device runs.