KUHN BELT-DRIVEN MINOTOR 3060, Руководство оператора

Страница: 7 / 64

7
20. Beware! Before operating the loading device (arm and grab), unfolding the cover or raising the
body, make sure that there can be no accidental contact with a power line.
21. Beware! Never stand by the delivery chute while the machine is in operation.
22. Beware! Make sure that the cover is in place before recycling (risk of projections).
23. BEWARE! NEVER PASS BETWEEN THE BEATER BARS TO ACCESS THE TURBINE.
24. BEWARE! WHEN CLEARING A BLOCKAGE, PROTECTIVE GLOVES MUST BE WORN AND
APPROPRIATE TOOLS USED.
25. If cut or injured on contact with the products contained in the machine, disinfect immediately in
order to avoid risks of infection.
26. Steering accuracy, tractor adhesion, roadholding and effective braking are affected by factors
such as the weight and nature of the towed machine, ballasting of the front axle and state of the
land or road. It is therefore essential to apply the degree of care appropriate to each particular
situation.
27. Be extra careful in bends and remember to take account of the overhang, length, height and
weight of the machine.
28. Before using the machine, make sure that the guards are fitted and in good conditions. Damaged
guards must be replaced immediately.
29. Before using the machine, check all screws and nuts particularly those holding the tools (teeth,
forks, blades, knives, conveyor slats, etc.). Tighten up if necessary. Also check drive chain and
conveyor chain tension. Tighten up if necessary. Check the condition of the cover.
30. Do not stand in the working area of the machine.
31. Beware! Crushing and shear zones may exist on remote controlled components, particularly
hydraulically or pneumatically-assisted ones.
32. Before getting down from the tractor or before any operations on the machine, switch off the
engine, remove the key from the ignition and wait until all moving parts are at a standstill.
33. Do not stand between the tractor and the machine until the parking brake has been applied and /
or chocks placed under the wheels.
34. Before working on the machine, make sure that it cannot be started up accidentally.
35. Do not use the loading components (arm, grab, etc.) as lifting gear. Do not stand on these
components.
36. The maximal authorized speed for the machine and the tractor is 25 km/h.