KUHN BELT-DRIVEN MINOTOR 3060, Руководство оператора

Страница: 42 / 64

42
Silage distribution
- The turbine should be set to 270 min -1 .
- Engage the tractor PTO.
- Start up the tractor hydraulics and bring up to nominal speed.
- Position the chute so that the silage is correctly channelled towards the floor or a manger.
- Release the grab slightly to ensure that the product is not packed too tightly.
- Product output is adjusted by:
. the tractor engine speed (which determines the hydraulic output and PTO speed),
. the forward speed of the tractor,
. the forward speed of the conveyor (to adjust, refer to “Description of Controls”).
- To distribute silage, start up the beater bar and conveyor (refer to “Description of Controls”).
- To stop distribution for a moment (posts, various obstacles, etc.), stop the beater bar and conveyor
rotation.
- At regular intervals, bring the silage on to the conveyor by pulling in the grab.
- When distribution is over, bring in the arm and grab completely. Close the delivery chute, disengage
the tractor PTO and switch off the engine.
Should the beater bar jam, switch the beater bar and conveyor into reverse in short bursts to free. It
may occasionally be necessary to hold the switch for a few seconds to shift back the mass of silage
inside the body.
Beware of the direction of rotation of the beater bar and conveyor.
A loaded machine running too long in reverse may be seriously damaged.
Never attempt to clear the product by hand or with a tool (fork, etc.) while the
machine is running.
Never climb on the machine or work inside the body while the machine is
running.
Beware! Blades, conveyors and other parts in contact with the product may
wear out quickly.
Any part which, through wear, is in danger of coming away and getting mixed
up with the feed must be replaced immediately.