KUHN BELT-DRIVEN MINOTOR 3060, Руководство оператора

Страница: 39 / 64

39
MACHINE OPERATION
Read carefully before starting up the machine.
The machine must be used by one person only.
Before starting up the machine and beginning work, check around the machine
(beware of children!). Make sure that you have sufficient visibility.
Keep people away from the danger area of the machine.
Beware! When operating the loading components (arm, grab, machine body)
and mixing components (cover), make sure that there can be no accidental
contact with a power line.
Never stand behind the machine during product mixing.
Never stand beside the distribution chute while the machine is in operation.
Before starting up, check that the machine is in good condition, the tension of
the chains is correct, the components are properly greased and the screws
are tight.
Before commencing any manoeuvres in reverse gear or operating the loading
gear, sound the horn twice.
1. SILAGE LOADING
Approaching the Silo (Fig. 1 showing an ALTOR 7560)
- Hitch the machine to the tractor (see “Starting Up” section).
- Raise the arm and grab for good visibility.
- Lower the machine as closely as possible to the ground in order to secure it to the silo with its heel
plate.
- Reverse the machine into the silo. Do not try to back your way into the silo by force.
- In the case of a clamp silo, position the machine slightly aslant in order to load as closely as possible
to the wall.