KUHN BELT-DRIVEN MINOTOR 3060, Руководство оператора

Страница: 29 / 64

29
1
2
1
ADJUSTING THE DELIVERY CHUTE SPEED
The speed of chute movement is adjusted by a flow
limiter (1) on the ram. To adjust, unlock the limiter
(Allen key n° 2) then select the speed by turning the
knobs. Tighten the knob to reduce the speed of chute
movement. Slacken the knob to increase the speed
of chute movement.
Beware! If chute movement is too slow, a blockage
may occur when the conveyor is running.
ADJUSTING THE BODY LOWERING SPEED
The body lowering speed is adjusted by a flow limiter
(2).
To adjust, unlock the limiter (Allen key n° 2) then select
the speed by turning the knobs.
By tightening the knob, the body is lowered more slowly.
By slackening it, the body is lowered more quickly.
Beware! Lowering the body too quickly can prevent
correct chute operation.
ADJUSTING THE ENGAGEMENT/DISENGAGEMENT RAM SPEED
The ram speed is adjusted by a flow limiter (1) located
at the entrance to the small chamber.
To adjust, unlock the limiter (Allen key n° 2) then select
the speed by turning the knob.
By tightening the knob, the ram moves more slowly and
by slackening it, it is moved more quickly.
Beware! Setting the ram speed too high can lead to
excessive vibration.