Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 910/1246
9.3.2.2
Viewing Switch Interface Configuration Page
This screen displays the status for all ports in the box.
Selection Criteria
MST ID
- Select the Multiple Spanning Tree instance ID from the list of all currently configured MST
ID's to determine the values displayed for the Spanning Tree parameters. Changing the selected
MST ID will generate a screen refresh. If Spanning Tree is disabled this will be a static value, CST,
instead of a selector.
Non-Configurable Port Status Data
Interface
- Identifies the port
Port Type
- For normal ports this field will be blank. Otherwise the possible values are:
Port Channel - the port is a member of a Link Aggregation trunk. Look at the LAG screens for
more information.
Mirrored - the port is a mirrored port.
Probe - the port is a monitoring port. Look at the Port Monitoring screens for more information.
STP Mode
- The Spanning Tree Protocol Administrative Mode associated with the port or LAG. The
possible values are:
Enable - spanning tree is enabled for this port.
Disable - spanning tree is disabled for this port.
Forwarding State
- The port's current state Spanning Tree state. This state controls what action a
port takes on receipt of a frame. If the bridge detects a malfunctioning port it will place that port into
the broken state. The other five states are defined in IEEE 802.1D:
