Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 813/1246
9.2.4.2
Uploading File from Switch Page
Use this menu to upload a code, configuration, or log file from the switch.
Configurable Data
File Type
- Specify the type of file you want to upload. The available options are Script, Code, CLI
Banner, Configuration, Error Log, Buffered Log, and Trap Log. The factory default is Error Log.
Transfer Mode
- Specify the protocol of mode to upload. The available options are FTP and TFTP.
User Name
- Specify the user account of the FTP site.
Password
- Specify the user password of the FTP site.
Server Address
- Enter the IP address of the TFTP server. The factory default is 0.0.0.0
Link-Local Address
- Indicate whether to use IPv6 link local address to transfer.
Transfer File Path
- Enter the path on the TFTP server where you want to put the file being
uploaded. You may enter up to 160 characters. The factory default is blank.
Transfer File Name
- Enter the name you want to give the file being uploaded. You may enter up to
30 characters. The factory default is blank.
Code/Cofiguration/Config Script
- Specify the file witch you want to upload from switch.
Start File Transfer
- To initiate the upload you need to check this box and then select the submit
button.
Non-Configurable Data
The last row of the table is used to display information about the progress of the file transfer. The
screen will refresh automatically until the file transfer completes.
Command Buttons
Submit
- Send the updated screen to the switch and perform the file upload.
