Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 655/1246
7.3.1.7
show ip ospf interface
This command displays the information for the IFO object or virtual interface tables.
Syntax
show ip ospf interface {<slot/port> | loopback <loopback-id> | vlan <vlan-id>}
Default Setting
None
Command Mode
Privileged
Exec User
Exec
Display Messages
IP Address:
The IP address for the specified interface.
Subnet Mask:
A mask of the network and host portion of the IP address for the OSPF
interface.
Secondary IP Address(es):
The secondary IP addresses if any are configured on
the interface.
OSPF Admin Mode:
States whether OSPF is enabled or disabled on a router
interface.
OSPF Area ID:
The OSPF Area ID for the specified interface.
OSPF Network Type:
The type of network on this interface that the OSPF is running on.
Router Priority:
A number representing the OSPF Priority for the specified interface.
Retransmit Interval:
A number representing the OSPF Retransmit Interval for the
specified
interface.
Hello Interval:
A number representing the OSPF Hello Interval for the specified interface.
Dead Interval:
A number representing the OSPF Dead Interval for the specified interface.
LSA Ack Interval:
A number representing the OSPF LSA Acknowledgment Interval for the
specified interface.
Transit Delay Interval:
A number representing the OSPF Transit Delay for the specified interface.
Authentication Type:
The OSPF Authentication Type for the specified interface are: none,
simple, and encrypt.
Metric Cost:
The cost of the OSPF interface.
Passive Status:
Shows whether the interface is passive or not.
OSPF MTU-ignore:
Indicates whether to ignore MTU mismatches in database descriptor
packets sent from neighboring routers.
The information below will only be displayed if OSPF is enabled.
State:
The OSPF Interface States are: down, loopback, waiting, point-to-point, designated
