Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 444/1246
6.12.1.11
show lldp med remote-device
The user can go to the CLI Privilege Exec to d display the summary information about remote devices
that transmit current LLDP-MED data to the system. use the
show lldp med remote-device
[<slot/port>]
Privilege command.
Syntax
show lldp med remote-device [<slot/port>]
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface:
Specifies the list of all the ports on which LLDP-MED is enabled.
Remote ID:
An internal identifier to the switch to mark each remote device to the system.
Device Class:
Specifies local device's MED Classification. There are four different kinds of devices,
three of them represent the actual end points (classified as Class I Generic [IP Communication
Controller etc.], Class II Media [Conference Bridge etc.], Class III Communication [IP Telephone
etc.]). The fourth device is Network Connectivity Device, which is typically a LAN Switch/Router,
IEEE 802.1 Bridge, IEEE 802.11 W ireless Access Point etc.
