Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 439/1246
Port ID:
Shows the port number that transmitted the LLDPDU.
System Name:
Shows the system name of the local device.
System Description:
Describes the local system by identifying the system name and versions of
hardware, operating system, and networking software supported in the device.
Port Description:
Describes the port in an alpha-numeric format.
System Capabilities Supported:
Indicates the primary function(s) of the device.
System Capabilities Enabled:
Shows which of the supported system capabilities are enabled.
Management Address:
Lists the type of address and the specific address the local LLDP agent
uses to send and receive information.
MAC/PHY Configuration/Status
Auto-Negetitation:
Identifies the auto-negotiation support and current status of the local device.
PMD Auto-Negetitation:
The duplex and bit-rate capability of the port of the local device.
Operational MAU Type:
Displays the MAU type. The MAU performs physical layer functions,
including digital data conversion from the Ethernet interfaces
’ collision detection and bit injection
into the network.
Power Via MDI
MDI Power Support:
The MDI power capabilities and status.
PSE Power Pair:
Indicates the way of feeding the voltage to the data cable.
Power Class:
PoE power class.
Link Aggregation
Aggregation Status:
Indicates the link aggregation capabilities and the current aggregation
status.
Aggregation Port Id:
Aggregated port identifier.
Maximum Frame Size:
Shows the maximum frame size capability of the implemented MAC and
PHY of the remote device.
Port VLAN Identity:
Shows the PVID of the connected port of the local device.
VLAN Name:
Shows the name of the VLAN which the connected port is in.
Protocol Identity:
Shows the particular protocols that are accessible through the port of the local
device.
