Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 27/1246
2. Power down the devices, attach the cable (or cable/adapter combination) to the correct ports,
and restore power.
3. Set the console to use the following communication parameters for your terminal:
The console port is set for the following configuration:
Baud rate: 115,200
Data width: 8 bits
Parity: none
Stop bits: 1
Flow Control: none
A typical console connection is illustrated below:
Figure 3-1: Console Setting Environment
3.3
Set Up your Switch Using Telnet Access
Once you have set an IP address for your Switch, you can use a Telnet program (in a VT-100 compatible
terminal mode) to access and control the Switch. Most of the screens are identical, whether accessed
from the console port or from a Telnet interface.
