Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 817/1246
Configurable Data
User Name
- Enter the name you want to give to the new account. (You can only enter data in this
field when you are creating a new account.) User names are up to eight characters in length and are
not case sensitive. Valid characters include all the alphanumeric characters as well as the dash ('-')
and underscore ('_') characters.
Password
- Enter the optional new or changed password for the account. It will not display as it is
typed, only asterisks (*) will show. Passwords are up to eight alpha numeric characters in length, and
are case sensitive.
Confirm Password
- Enter the password again, to confirm that you entered it correctly. This field will
not display, but will show asterisks (*).
Configure Encryption -
The check box must be checked in order to change the Encryption Protocol
and Encryption Key.
Encryption Key
- If you selected DES in the Encryption Protocol field enter the SNMPv3 Encryption
Key here. Otherwise this field is ignored. Valid keys are 8 to 64 characters. The Apply checkbox must
be checked in order to change the Encryption Protocol and Encryption Key.
Non-Configurable Data
SNMP v3 Access Mode
- Indicates the SNMPv3 access privileges for the user account. The admin
account always has 'Read/Write' access, and all other accounts have 'Read Only' access.
Lockout Status
- Indicates whether the user account is locked due to excessive failed login
attempts. The threshold for number of attempts before lockout is specified by 'lockout attempts' on
the password management page.
Password Expiration Date
- Displays the date after which the user will be required to change
passwords if password aging is enabled.
Command Buttons
Submit
- Update the switch with the values on this screen. If you want the switch to retain the new
values across a power cycle, you must perform a save.
Delete
- Delete the currently selected user account. If you want the switch to retain the new values
across a power cycle, you must perform a save. This button is only visible when you have selected a
user account with 'Read Only' access. You cannot delete the 'Read/W rite' user.
