Konica Minolta BIZHUB C250P, Руководство по обслуживанию

Страница: 280 / 422

Field Service Ver. 2.0 Mar. 2006 17. Jig Soft
239
bizhub C250P
Adjustment / Setting
17.8.8 Detail on settings
A. System Selection
B. ID Code
C. Detail Setting
(1) Basic Setting
Functions • To select the system type for remote diagnosis.
Use • Use to newly build or change the system.
Setting/
Procedure • Select E-Mail, Modem, or Fax.
• The default setting is “E-Mail.”
E-Mail Modem Fax (Not Used)
Functions • To register the Service ID.
Use • Use when registering and changing Service ID.
Setting/
Procedure • Enter a 7-digit code from the 10-Key Pad. (0000001 to 9999999)
<Registration>
• Click ID Code and enter the Service ID.
• Click [ID code] to register the ID.
• The [Detail Setting] will appear when the ID has been registered.
Functions • Execute the primary setting.
Use • Use to change the set contents.
• Use to register the machine to the CS Remote Care Center.
Setting/
Procedure 1. Call the Service Mode to the screen.
2. Click [CS Remote Care].
3. Clicking the [Detail Setting] will display the primary setting.
Primary Setting
• Set the Center ID, Device ID, and the phone No.
• When e-mail is selected for system and all setup procedures are completed, E-mail
address of the Center is displayed.
* When entering the phone No, 10-Keys and keys on the screen have following mean-
ings.
[-] Pose : Waits to start transmitting after dialing
[W] Wait : Detects the dial tone of the other end
[T] Tone dial : Carry out tone dialing
[P] Pulse dial : Carry out pulse dialing
[*],[#]
: To be used as necessary
Initial Transmission
• Clicking the Initial Transmission key will sent the information to the CS Remote Care
Center to register the machine.
(Only when the Modem or Fax is selected on the system Input.)
bizhub_C250P_Total.book 239 ページ ２００６年３月２７日 月曜日 午前８時２８分