Konica Minolta BIZHUB C250P, Руководство по обслуживанию

Страница: 252 / 422

Field Service Ver. 2.0 Mar. 2006 16. TECH. REP. MODE
211
bizhub C250P
Adjustment / Setting
16.4.10 Troubleshooting for CS Remote Care
If communication is not done properly during use of the modem, check the condition by fol-
lowing the procedures shown below.
• Is the Modem power ON?
• Is the phone line normally connected?
0020 Timeout of Telegram Delivery
(At waiting mode of telegram delivery the
machine fails to receive the telegram in a given
time.) • Try communication again.
0021 Telegram Size Over
(The machine receives the telegram whose size
exceeds the specification.) • Contact responsible person of
KONICA MINOLTA.
0022 Transmitting Phase Response NG
(Transmitting phase response MSG is not appro-
priate.) • Contact responsible person of
KONICA MINOLTA.
0023 Timeout of Transmitting Phase Response MSG
(Transmitting phase response MSG is timeout.) • Contact responsible person of
KONICA MINOLTA.
0024 Event Data Acquisition Function Error
(Although the transmitting phase response MSG
is OK, the function for Data acquisition shows
“No event,”.) • Contact responsible person of
KONICA MINOLTA.
0025 Timeout of Driver transmitting check MSG
(Transmitting check MSG from the driver task is
timeout.) • Contact responsible person of
KONICA MINOLTA.
0026 Detection of Internal Contradiction
(Unknown event is detected. Condition value is
not correct or so on.) • Contact responsible person of
KONICA MINOLTA.
0027 Transmission / Receiving collision
(Receiving is detecting during transmitting pro-
cessing) • Try communication again.
Error code Error Solution
1
bizhub_C250P_Total.book 211 ページ ２００６年３月２７日 月曜日 午前８時２８分