Konica Minolta BIZHUB C250P, Руководство по обслуживанию

Страница: 221 / 422

16. TECH. REP. MODE Field Service Ver. 2.0 Mar. 2006
180
bizhub C250P
Adjustment / Setting
16. TECH. REP. MODE
16.1 Calling the Tech. Rep. Mode to Screen
NOTE
• Ensure appropriate security for Tech. Rep. mode function setting procedures.
16.1.1 Procedure
1. Make sure that the default screen (Ready to print) is being displayed, and press the
Menu/Select key on the control panel.
2. Display the Service mode using , keys.
3. Press key to open the Password screen.
4. Enter the Password using , , , and keys.
5. Press the Menu/Select key to set the Password.
NOTE
• When selecting “CE Authentication” under “Enhanced Security” available from
Service Mode, authentication by CE password is necessary.
Enter the 8 digits CE password, and press the Menu/Select key.
(The initial setting for CE password is “92729272.”)
• If a wrong CE password is entered, re-enter the right password. The machine will
not enter Service Mode unless the CE password is entered correctly. To return to
the Basic screen, turn Main Power Switch OFF, and ON again.
• The service code entered is displayed as “
✽
.”
6. Display the Service mode item to be changed using , , , and keys.
7. Press the Menu/Select key to set the item to be changed.
16.1.2 Exiting
• Press the “Cancel” key.
16.1.3 Changing the Setting Value in Service Mode Functions
1. Enter the target value using , keys.
2. Press key to shift to the next digit.
3. Enter the target value using , keys.
4. Repeat the steps 2 and 3 to enter all the necessary items.
5. Press the Menu/Select key to enter the setting.
4038F3E188DA
Key
Menu/Select Key Key
Cancel key
Key Key
Message window
bizhub_C250P_Total.book 180 ページ ２００６年３月２７日 月曜日 午前８時２８分