Komatsu WA800-3E0, Руководство по эксплуатации и техническому обслуживанию

Страница: 200 / 336

TRANSPORTATION
OPERATION
3-138
LOCATION OF LIFTING POSITION MARK 3
WEIGHT TABLE 3
LIFTING PROCEDURE 3
The machine can be lifted only if it has hook mark labels.
When lifting the machine, stop the machine on level ground and do as follows.
1. Start the engine, make sure that the machine is horizontal,
then set the work equipment to the travel posture.
F o r d e ta i l s , s e e “ P R E PA R AT I O N S F O R M O V I N G
MACHINE (3-89)“.
(A): 70 - 90 cm
Operating weight Front wheel load Rear wheel load
Center of gravity
(from front axle)
WA800-3E0 101825 kg 58935 kg 42890 kg 2300 mm
WA900-3E0 107125 kg 59735 kg 47390 kg 2410 mm