Komatsu WA800-3E0, Руководство по эксплуатации и техническому обслуживанию

Страница: 32 / 336

SAFETY LABELS
SAFETY
2-10
(13) “Do not modify ROPS“ sign (09620-30200)
ROLL-OVER PROTECTIVE STRUCTURE (ROPS)
THE ROLL-OVER PROTECTIVE STRUCTURE OF THIS
MACHINE COMPLIES WITH THE FOLLOWING STANDARD
OR (RECOMMENDED PRACTICES) INTERNATIONAL
STANDARD: ISO 3471(ROPS) & ISO 3449 (FOBS)
AMERICAN STANDARD: SAEJ
q
Altering ROPS may weaken it. Consult Komatsu Distributor
before altering.
q
Rops may provide less protection if it has been structurally
damaged or involved in roll-over.
q
Always wear seat belt when moving.
(14) High pressure warning
(Caution when handling accumulator) (09659-A057B)
q
There is the hazard of explosion causing injury.
q
Do not disassemble the accumulator, make holes in it, weld
it, cut it, hit it roll it or bring it near flame.
(15) Warning for battery
WARNING
Keep sparks, flame, cigarettes away.
(16) Jump start prohibited (09842-A0481)
q
Start the engine only after sitting down in the operator’s
seat.
q
Do not attempt to start the engine by short-circuiting the
engine starting circuit. Such an act may cause a serious
bodily injury or fire.
Safety label (15) is stuck on the machine by the battery maker
Safety label (16) is attached on the starting motor of the engine.
Parts numbers for the safety labels (1), (2), (4): 426-93-21550.
Parts numbers for the safety label (3): 427-93-21750.
Parts numbers for the safety label (5) to (9), (11): 426-93-21570.