Komatsu WA800-3E0, Руководство по эксплуатации и техническому обслуживанию

Страница: 160 / 336

OPERATION
OPERATION
3-98
ADJUSTING TRANSMISSION CUT-OFF POSITION
CAUTION
Apply the parking brake before adjusting the transmission cut-off position.
Adjust the depression position of the left brake pedal used to shift the transmission to neutral at the position to
match the operation.
1. Start the engine with starting switch (1), then set parking
brake switch (2) to the ON position.
2. Turn transmission cut-off switch (3) ON.
Transmission cut-off pilot lamp (4) will light up.
3. Depress left brake pedal (5) and adjust it to the position
where it is desired to shift the transmission to Neutral.
4. Press transmission cut-off set switch (6), then release it. At
the point where the switch is released, the buzzer will
sound (beep beep) and the cut-off position is set.
Method of returning to default setting
5. After the buzzer sounds in Step 4 of the adjustment proce-
dure, press transmission cut-off set switch (6) again within
2 seconds, and release it.
6. The buzzer will sound with a long sound and the adjusted
cut-off position is canceled.
The cut-off position is returned to the default setting.
Transmission cut-off function
When the transmission cut-off switch is ON, if the brake pedal is depressed, the transmission is returned to Neutral
when the brake pedal is depressed to the set position.
REMARK
When the transmission cut-off switch is OFF, the transmission does not return to Neutral.
Even if the left brake pedal is not depressed, it is possible to set the transmission cut-off position, but in that case,
it is set to the default position (the position where the brake pedal is depressed least).